Machine Parts

Ming Xiao Manufacturing Co., Ltd engaged in Machine Parts manufacuring more than 20years, we have old lathe turning machine, automatic turning machine, and numerical control turning machine,CNC Machining Center, we can optimize the turning processes to make the machining cost to be lowest, accurate tolerance dimensions we use Numerical control machine, and low toleracne requested dimensions we use old lathe machine to produce, and small turned parts we use automatic lathe machine to produce.

As a professional machine parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turned parts,Copper & Brass turned parts,Aluminum Turned Parts & Machined parts, such as tube coupling, hose coupling, shaft, pipe joint parts, hose connectors & transition connectors, copper machined tube, flange,bushing, knighthead, pedestal, Piston Rod, insert long pin, Dowel Pin, Drive Pin & Rod,ball head bolt, long rod machined parts, long thread tube parts, nonstandard thread bolt & nut,Extension Rod, etc. Widely use for all industries.

The technics & capabilities for machined parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, CNC machining,Tooling milling & Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

Follow are the informations about our precision parts by CNC machining.

 

● CNC Precision machining parts accuracy

Machining accuracy: IT6 level, such as the 10mm dimensions, tolerances can be done0.009mm, 20mm size tolerances can be 0.013mm

● Maximum size of Precision parts suit to CNC machining

Lathe parts (turning parts , such as axes, coupling,bushing, thread rod , etc.) followingthe outer diameter of 300mm, length less than 150mm

Milling parts (box, cylinder, etc.) 800mm long, 330mm wide, 120mm high.

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

● Materials for CNC Precision machining parts

We can produce CNC machining components’ materials are:

An aluminum alloy series: all aluminum and aluminum alloy (ASTM Grade from 1050-7475), commonly used are: 2011,5052,6061,7075, etc.

(2) Copper Alloy Series: all copper and copper alloy, copper, copper, brass, bronze, phosphor (the ASTM grades from C11000 to C38000), commonly used: C11000, C22000, C26000

(3) Stainless Steel Series: all the basic machining stainless steel, the ASTM grades (JISgrade corresponds to the basic, together with the SUS can):201,301,303,304,314,316,420,430,630

Steel series: all the basic machining steel can be processed, for example: 20 # steel,45 steel, easy to cut iron (common SUM24L, SUM22, Y12, Y15)

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Stainless Steel Machined Parts

Stainless Steel Turned Screws

Small Machined Parts

Stainless Steel Machine Parts

Metal Stamping Parts

We specialize in custom manufacturing sheet metal stamping / punching parts, such as sheet metal stamping clamps, metal stamping seals, sheet metal stamping brackets, sheet metal stamping holder, console cover, sheet metal frames, spring clip, stainless steel plates, aluminum & steel shelf, Aluminum cover, Square/ Rectangular washers, metal stamped PCBA front Panel, pressed-in hole parts by PEM studs,nuts & fasteners, screw and pin welded stamping parts,mounted stamping parts, electronic mounting sheet plates, copper terminal connectors, and all metal stamping parts.

Stamping is the forming process of the workpiece (stamping part) by applying external force to the plate, strip, pipe and profile by press and die to produce plastic deformation or separation. Stamping and forging belong to moulding processing (or pressure machining). The stamping raw materials are mainly hot rolled and cold-rolled steel plates and steel strips.

We are professional metal stamping manufacturers from China Ningbo, we have produced many kinds of metal stamping parts for foreign customers with 15 years experiences, If you are interest in our custom metal stamping services, welcome send your design and requirements to us, we shall work a more competitive price for you.

The technics & capabilities: Punching, cutting, bending / flexing / curving, pressing, forming,welding / bonding, riveting, grinding edge, lettering, components Assembly.

Available Materials: Aluminum,copper/ brass,stainless steel, carbon steel, Mild steel,cold roll steel, Kovar steel,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead time for samples in 15days.
Lead time for mass production: generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Turning Parts

Ming Xiao Manufacturing Co., Ltd engaged in Turning Parts manufacturing more than 20 years, we have old lathe turning machines, automatic turning machines, and numerical control turning machines, we can optimize the turning processes to make the machining cost to be lowest, accurate tolerance dimensions we use Numerical control machine, and low tolerance requested dimensions we use old lathe machine to produce, and small turned parts we use automatic lathe machine to produce.

Turning refers to lathe machining as part of machining. Lathe machining mainly uses a turning tool to turn a rotating workpiece. Lathes are mainly used to machine shafts, discs, sleeves and other workpieces with rotating surfaces. They are the most widely used type of machine tooling in machinery manufacturing and repair factories.

It is on the lathe that the shape and size of the blank are changed by the rotational motion of the workpiece and the linear or curved motion of the tool, and it is processed to meet the requirements of the drawings.
Turning is a method in which a workpiece is cut by a workpiece on a lathe with respect to a tool rotation. Turning machining can be mainly provided by the workpiece rather than the tool. Turning is the most basic and common method of cutting and it occupies a very important position in production. Turning is suitable for machining rotary surfaces. Most workpieces with rotary surfaces can be machined by turning methods such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end surfaces, grooves, threads, and rotary forming surfaces. The tools used are mainly turning tools.
Lathes are the most widely used category in all types of metal cutting machine tools, accounting for about 50% of the total number of machine tools. The lathe can be used to turn a workpiece with a turning tool, but can also use drills, reamers, taps, and knurling tools for drilling, reaming, tapping, and knurling. According to different characteristics of the process, layout and structural characteristics, lathes can be divided into horizontal lathes, floor lathes, vertical lathes, turret lathes and copying lathes, most of which are horizontal lathes.

As a professional turning parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turning parts,Copper & Brass turned parts,Aluminum Turned Parts & Machined parts, such as tube coupling, hose coupling, shaft,Axis,pipe joint parts,hose connectors & transition connectors,copper machined tube, flange,bushing, Sleeve,knighthead,pedestal,Piston Rod,insert long pin, Dowel Pin,Drive Pin & Rod,ball head bolt,long rod machined parts,long thread tube parts,nonstandard thread bolt & nut,Extension Rod, etc.

We custom Metal turned Parts for all industries, welcome contact us to discuss about your projects.

The technology & capabilities for Turned parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, Drilling, Grinding, Thread rolling, knurling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

The precision tolerance can reach to +/- 0.02 mm, and the surface roughness can reach N6 standard after milling.

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Plastic Parts

Ming Xiao Mfg engaged in custom plastic parts by plastic injection molding more than 15 years, our factory is from Ningbo China, we can custom all kinds of plastic parts,steel pins inserted plastic parts.

We have a variety of injection molding machines, large injection molding machines and small injection molding machines, vertical injection molding machines and horizontal injection molding machines, according to the type and structure of plastic components to choose the most suitable machine to produce, thus saving production and improving production efficiency and quality assurance.

Plastic parts is very simple & popular in all industries, such as plastic cover, plastic knob,plastic bracket,plastic flange,plastic valves,plastic gears,plastic bushing,plastic base,plastic shafts,plastic mountings, plastic coupling,plastic fabrications,etc.

Plastic injection molding is suit to complicated plastic parts with complex profile or structure , this is the most popular way for produce plastic parts.

If you are interest in our plastic injection molding custom services, pls send your drawings and samples to us, we shall work a price for you in 48 hours.

The technics & capabilities: plastic injection molding, Plastic insert molding injection,

Materials: Abs,POM, PVC,PC,Polyethylene,nylon 6, nylon 66, polypropylene, co-polymer polypropylene, polyester,PD-PE, NBR, ect.

Finish treating: Remove burrs, chrome plating for ABS.

Lead time for Mold and make samples is 35days.
Lead time for mass production: generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available ! Some materials can supply UL such as ABS or  inflaming retarding materials.

Plastic clip (ABS) produced by injection molding

Plastic tooling handles produced from ABS

Plastic Injection Molding China

Plastic gear covers produced from POM

Plastic Injection Molding China

Plastic leaf (plastic component) produced by insert Molding

Stainless Steel Flange

Flanges are disc-shaped parts that are most common in pipeline engineering. The flanges are used in pairs and with the matching flanges on the valve. In plumbing, flanges are primarily used for pipe connections. In the pipelines that need to be connected, a variety of flanges are installed. The low-pressure pipelines can use wire-bonded flanges, and the welding flanges are used at pressures above 4 kg. A gasket is placed between the two flanges and then bolted. Different pressure flanges have different thicknesses and use different bolts.

Pumps and valves, when connected to the pipeline, the parts of these equipment are also made into the corresponding flange shape, also known as flange connection. Connection parts that are closed at the same time by bolting on both planes are generally referred to as “flanges”. For example, the connection of ventilation ducts may be referred to as “flange parts”. However, this connection is only a part of the equipment, such as the connection between the flange and the water pump, it is not good to call the pump “flange parts”. Smaller such as valves, etc., can be called “flange parts”.

 

 ANSI Stainless Steel Forged Flange
Best quality and competitive price
Description Stainless steel Flange
Products category SOP SOH BL WN MSS API AWWA LONGWN Flange
Airtight surface type
Standard ANSI,DIN,EN,AS,JIS
and customers’ drawings for special use
Technology forged Flange
certificate ISO9001:2000,QS-9000,CNAS, TUV, BV
accessories and access to quality inspection
Inspections Factory in-house or Third Party inpection
Our main markets Europe, Middle East Asia,Korea,etc
Material 316L, 316, 304L, 304,
Class 150#,300#,400#,600#,900#,1500#,2500#
Production process raw material–cutting–heating–forging–heat treatment
–maching–inspection.
Application Petroleum, chemical, power, gas, metallurgy,
shipbuilding,construction, etc
Type SLIP-ON SOCKET-WELDING Flange
Delivery 7-45 Days
Remarks As customers’ request

 

1) ANSI B16.5, ASME B16.47 FLANGE

Size range: 1/2″ to 24″  DN15 to DN600

Design: welding neck, slip on, blind, socket welding, threaded, lap-joint

Pressure: 150#, 300#, 600#,900#,1500#, 2500#

Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS

Material: stainless steel  304/304L, 316/316L

Coating: Bright

Package: seaworthy plywooden case, wooden pallet

 

2) EN1092-1 FLANGE

Size range: DN15 to DN600

Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking

type12 slip on flange, type 13 threaded flange

Pressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100

Material: carbon steel C22.8, S235, S235JR, P235GH, stainless steel: 304/304L, 316/316L

Coating:   Bright

Package: sea worthy plywooden case, wooden pallet

 

3) DIN FLANGE

Size range:   DN15 to DN600

Design: slip on flange DIN2573,2576,2502,2503, 2543,2545

welding neck falnge DIN2631, 2632,2633,2634,2635

blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40

threaded falnge DIN2565,2566,2567,2567

loose flange DIN 2641,2642,2656,2673

Material: stainless steel 1.4301, 1.4404

Coating: rust-proof oil, transparent paint, cold and hot galvanize

Package: sea worthy plywooden case, wooden pallet

 

4) GOST FLANGE

Size range: DN15 to DN 2000

Design : plate falnge 12820-80, welding neck flange 12821-80

Pressure: PN6, PN10, PN16, PN25, PN40

Material: stainless steel 304/304L, 316/316L

Coating: rust-proof oil, cold and hot galvanize

Package: sea worthy plywooden case, wooden pallet

5) JIS FALNGE

Size ragne : 15A to 2000A

Design: SOP, BIND, SOH,

Puressure: 1K, 2K, 5K, 10K, 16K, 20K, 30K, 40K, 210k, 280k, 350k

Material: stainless  steel SUS304, SUS316

Coating : bright

Packing: sea worthy plywooden case, wooden pallet

Hot forging the rough round rings, then Machining by CNC turning Machines,Drilling holes…

Follow are the informations about our precision parts by CNC machining.

 

● CNC Precision machining parts accuracy

Machining accuracy: IT6 level, such as the 10mm dimensions, tolerances can be done0.009mm, 20mm size tolerances can be 0.013mm

● Maximum size of Precision parts suit to CNC machining

Lathe parts (turning parts , such as axes, coupling,bushing, thread rod , etc.) followingthe outer diameter of 300mm, length less than 150mm

Milling parts (box, cylinder, etc.) 800mm long, 330mm wide, 120mm high.

Stianless Steel 304 / 304L, 316 / 316L

Can provide Material certificates of EN10204 3.1, PED4.3, Materials comply with CNAS, TUV, BV, ABS,
accessories and access to quality standards.

Lead time for custom samples of metal machined parts is 15days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificates), Test Report, ROHS / SGS

Stainless Steel Quick Valve Fittings

Name: Pneumatic quick connector

Material: stainless steel 304 316 (non-standard)

Seal ring: fluoro rubber

Temperature: -20 ° C – 250 ° C

Pressure: 0.1MPA-4.0MPA

Applicable pipes: PU, PV, PVC, nylon, polyurethane, Teflon pipe, etc.

Applicable industries: pneumatic industry, general industry, automobile industry, mining, shipbuilding industry (applicable to various corrosion, high temperature, high pressure environment)

Features: JHSHC series quick-release pipe joints are suitable for connecting hard and semi-rigid nylon pipes and plastic pipes with a working pressure of 4.0Mpa. The series of pipe joints have quick intubation and extubation, and have convenient installation, reliable sealing, firm and beautiful appearance.

Intubation specifications: Φ4, Φ6, Φ8, Φ10, Φ12, Φ14, Φ16

Thread specifications: 1/8 inch, 1/4 inch, 3/8 inch, 1/2, M5, M6, M8, M10, M12 (non-standard)

Takeover considerations:

1. Make sure that the cut surface of the pipe is vertical, there are no scratches on the outside of the pipe and the pipe is not oval.

2. When inserting the pipe, be sure to insert it into the bottom of the joint (the pipe is probably inserted about 15 mm). If the pipe is not inserted, it may cause air leakage.

3. After the pipe is installed, pull the pipe to confirm that the pipe cannot be pulled out.

Precautions when disassembling:

1. Use a suitable tool to remove the fitting using the outer hexagon of the fitting

2. It is necessary to remove the sealing material adhered to the opposite side of the pipe joint, otherwise the adhered sealing material may enter the peripheral components, causing failure.

The technics & capabilities for machined parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, CNC machining,Tooling milling & Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

Follow are the informations about our precision parts by CNC machining.

 

● CNC Precision machining parts accuracy

Machining accuracy: IT6 level, such as the 10mm dimensions, tolerances can be done0.009mm, 20mm size tolerances can be 0.013mm

● Maximum size of Precision parts suit to CNC machining

Lathe parts (turning parts , such as axes, coupling,bushing, thread rod , etc.) followingthe outer diameter of 300mm, length less than 150mm

Milling parts (box, cylinder, etc.) 800mm long, 330mm wide, 120mm high.

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

● Materials for CNC Precision machining parts

We can produce CNC machining components’ materials are:

An aluminum alloy series: all aluminum and aluminum alloy (ASTM Grade from 1050-7475), commonly used are: 2011,5052,6061,7075, etc.

(2) Copper Alloy Series: all copper and copper alloy, copper, copper, brass, bronze, phosphor (the ASTM grades from C11000 to C38000), commonly used: C11000, C22000, C26000

(3) Stainless Steel Series: all the basic machining stainless steel, the ASTM grades (JISgrade corresponds to the basic, together with the SUS can):201,301,303,304,314,316,420,430,630

Steel series: all the basic machining steel can be processed, for example: 20 # steel,45 steel, easy to cut iron (common SUM24L, SUM22, Y12, Y15)

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Pneumatic Quick Valve Joint

Name: Pneumatic quick connector

Material: stainless steel 304 316 (non-standard)

Seal ring: fluoro rubber

Temperature: -20 ° C – 250 ° C

Pressure: 0.1MPA-4.0MPA

Applicable pipes: PU, PV, PVC, nylon, polyurethane, Teflon pipe, etc.

Applicable industries: pneumatic industry, general industry, automobile industry, mining, shipbuilding industry (applicable to various corrosion, high temperature, high pressure environment)

Features: JHSHC series quick-release pipe joints are suitable for connecting hard and semi-rigid nylon pipes and plastic pipes with a working pressure of 4.0Mpa. The series of pipe joints have quick intubation and extubation, and have convenient installation, reliable sealing, firm and beautiful appearance.

Intubation specifications: Φ4, Φ6, Φ8, Φ10, Φ12, Φ14, Φ16

Thread specifications: 1/8 inch, 1/4 inch, 3/8 inch, 1/2, M5, M6, M8, M10, M12 (non-standard)

Takeover considerations:

1. Make sure that the cut surface of the pipe is vertical, there are no scratches on the outside of the pipe and the pipe is not oval.

2. When inserting the pipe, be sure to insert it into the bottom of the joint (the pipe is probably inserted about 15 mm). If the pipe is not inserted, it may cause air leakage.

3. After the pipe is installed, pull the pipe to confirm that the pipe cannot be pulled out.

Precautions when disassembling:

1. Use a suitable tool to remove the fitting using the outer hexagon of the fitting

2. It is necessary to remove the sealing material adhered to the opposite side of the pipe joint, otherwise the adhered sealing material may enter the peripheral components, causing failure.

The technics & capabilities for machined parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, CNC machining,Tooling milling & Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

Follow are the informations about our precision parts by CNC machining.

 

● CNC Precision machining parts accuracy

Machining accuracy: IT6 level, such as the 10mm dimensions, tolerances can be done0.009mm, 20mm size tolerances can be 0.013mm

● Maximum size of Precision parts suit to CNC machining

Lathe parts (turning parts , such as axes, coupling,bushing, thread rod , etc.) followingthe outer diameter of 300mm, length less than 150mm

Milling parts (box, cylinder, etc.) 800mm long, 330mm wide, 120mm high.

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

● Materials for CNC Precision machining parts

We can produce CNC machining components’ materials are:

An aluminum alloy series: all aluminum and aluminum alloy (ASTM Grade from 1050-7475), commonly used are: 2011,5052,6061,7075, etc.

(2) Copper Alloy Series: all copper and copper alloy, copper, copper, brass, bronze, phosphor (the ASTM grades from C11000 to C38000), commonly used: C11000, C22000, C26000

(3) Stainless Steel Series: all the basic machining stainless steel, the ASTM grades (JISgrade corresponds to the basic, together with the SUS can):201,301,303,304,314,316,420,430,630

Steel series: all the basic machining steel can be processed, for example: 20 # steel,45 steel, easy to cut iron (common SUM24L, SUM22, Y12, Y15)

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Aluminum Machined Ring

Ming Xiao Manufacturing Co., Ltd engaged in Machine Parts manufacuring more than 20years, we provide CNC turning service,Precision Machining such as CNC milling, tooling milling, Tapping, Knurling,Lathe Cutting…

We also outsouring rough parts from Cold forging, hot forging,die casting and all foundries,then machining to the final parts for saving the material cost.

Our Machinery Parts widely use for all industries, such as furniture hardwares, electronic appliance, automobile, machines…

If you have any machined parts need to be custom produced from China, welcome send us a inquiry, we will provide rapid response service.

The technics & capabilities for machined parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, CNC machining,Tooling milling & Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

Follow are the informations about our precision parts by CNC machining.

 

● CNC Precision machining parts accuracy

Machining accuracy: IT6 level, such as the 10mm dimensions, tolerances can be done0.009mm, 20mm size tolerances can be 0.013mm

● Maximum size of Precision parts suit to CNC machining

Lathe parts (turning parts , such as axes, coupling,bushing, thread rod , etc.) followingthe outer diameter of 300mm, length less than 150mm

Milling parts (box, cylinder, etc.) 800mm long, 330mm wide, 120mm high.

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

● Materials for CNC Precision machining parts

We can produce CNC machining components’ materials are:

An aluminum alloy series: all aluminum and aluminum alloy (ASTM Grade from 1050-7475), commonly used are: 2011,5052,6061,7075, etc.

(2) Copper Alloy Series: all copper and copper alloy, copper, copper, brass, bronze, phosphor (the ASTM grades from C11000 to C38000), commonly used: C11000, C22000, C26000

(3) Stainless Steel Series: all the basic machining stainless steel, the ASTM grades (JISgrade corresponds to the basic, together with the SUS can):201,301,303,304,314,316,420,430,630

Steel series: all the basic machining steel can be processed, for example: 20 # steel,45 steel, easy to cut iron (common SUM24L, SUM22, Y12, Y15)

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Aluminum Machine Parts

Ming Xiao Manufacturing Co., Ltd engaged in Machine Parts manufacuring more than 20years, we have old lathe turning machine, automatic turning machine, and numerical control turning machine,CNC Machining Center, we can optimize the turning processes to make the machining cost to be lowest, accurate tolerance dimensions we use Numerical control machine, and low toleracne requested dimensions we use old lathe machine to produce, and small turned parts we use automatic lathe machine to produce.

As a professional machine parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turned parts,Copper & Brass turned parts,Aluminum Turned Parts & Machined parts, such as tube coupling, hose coupling, shaft, pipe joint parts, hose connectors & transition connectors, copper machined tube, flange,bushing, knighthead, pedestal, Piston Rod, insert long pin, Dowel Pin, Drive Pin & Rod,ball head bolt, long rod machined parts, long thread tube parts, nonstandard thread bolt & nut,Extension Rod, etc. Widely use for all industries.

The technics & capabilities for machined parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, CNC machining,Tooling milling & Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

Follow are the informations about our precision parts by CNC machining.

 

● CNC Precision machining parts accuracy

Machining accuracy: IT6 level, such as the 10mm dimensions, tolerances can be done0.009mm, 20mm size tolerances can be 0.013mm

● Maximum size of Precision parts suit to CNC machining

Lathe parts (turning parts , such as axes, coupling,bushing, thread rod , etc.) followingthe outer diameter of 300mm, length less than 150mm

Milling parts (box, cylinder, etc.) 800mm long, 330mm wide, 120mm high.

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

● Materials for CNC Precision machining parts

We can produce CNC machining components’ materials are:

An aluminum alloy series: all aluminum and aluminum alloy (ASTM Grade from 1050-7475), commonly used are: 2011,5052,6061,7075, etc.

(2) Copper Alloy Series: all copper and copper alloy, copper, copper, brass, bronze, phosphor (the ASTM grades from C11000 to C38000), commonly used: C11000, C22000, C26000

(3) Stainless Steel Series: all the basic machining stainless steel, the ASTM grades (JISgrade corresponds to the basic, together with the SUS can):201,301,303,304,314,316,420,430,630

Steel series: all the basic machining steel can be processed, for example: 20 # steel,45 steel, easy to cut iron (common SUM24L, SUM22, Y12, Y15)

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Turned Parts

Ming Xiao Manufacturing Co., Ltd engaged in Turned Parts manufacuring more than 20years, we have old lathe turning machine, automatic turning machine, and numerical control turning machine, we can optimize the turning processes to make the machining cost to be lowest, accurate tolerance dimensions we use Numerical control machine, and low toleracne requested dimensions we use old lathe machine to produce, and small turned parts we use automatic lathe machine to produce.

As a professional turned parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turned parts,Copper & Brass turned parts,Aluminum Turned Parts & Machined parts, such as tube coupling, hose coupling, shaft,Axis,pipe joint parts,hose connectors & transition connectors,copper machined tube, flange,bushing, Sleeve,knighthead,pedestal,Piston Rod,insert long pin, Dowel Pin,Drive Pin & Rod,ball head bolt,long rod machined parts,long thread tube parts,nonstandard thread bolt & nut,Extension Rod, etc.

We custom Metal turned Parts for all industries, welcome contact us to develop your projects.

The technics & capabilities for Turned parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

The precision telorance can reach to +/- 0.02mm, and the surface roughness can reach N6 standard after milling.

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Stainless Steel Turned Pins

Machined bushings

Stainless Steel Turned Screws

Aluminum Turned Parts

Precision Machining Parts

Ming Xiao Manufacturing Co., Ltd engaged in Machine Parts manufacturing more than 20 years, we have old lathe turning machine, automatic turning machine, and numerical control turning machine,CNC Machining Center, we can optimize the turning processes to make the machining cost to be lowest, accurate tolerance dimensions we use Numerical control machine, and low tolerance requested dimensions we use old lathe machine to produce, and small turned parts we use automatic lathe machine to produce.

As a professional machine parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turned parts,Copper & Brass turned parts,Aluminum Turned Parts & Machined parts, such as tube coupling, hose coupling, shaft, pipe joint parts, hose connectors & transition connectors, copper machined tube, flange,bushing,sleeve, stand bar, pedestal, Piston Rod, insert long pin, Dowel Pin, Drive Pin & Rod,ball head bolt, long rod machined parts, long thread tube parts, nonstandard thread bolt & nut,Extension Rod, etc. Widely use for all industries.

The technics & capabilities for machined parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, CNC machining,Tooling milling & Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

Follow are the informations about our precision parts by CNC machining.

 

● CNC Precision machining parts accuracy

Machining accuracy: IT6 level, such as the 10mm dimensions, tolerances can be done0.009mm, 20mm size tolerances can be 0.013mm

● Maximum size of Precision parts suit to CNC machining

Lathe parts (turning parts , such as axes, coupling,bushing, thread rod , etc.) followingthe outer diameter of 300mm, length less than 150mm

Milling parts (box, cylinder, etc.) 800mm long, 330mm wide, 120mm high.

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

● Materials for CNC Precision machining parts

We can produce CNC machining components’ materials are:

An aluminum alloy series: all aluminum and aluminum alloy (ASTM Grade from 1050-7475), commonly used are: 2011,5052,6061,7075, etc.

(2) Copper Alloy Series: all copper and copper alloy, copper, copper, brass, bronze, phosphor (the ASTM grades from C11000 to C38000), commonly used: C11000, C22000, C26000

(3) Stainless Steel Series: all the basic machining stainless steel, the ASTM grades (JISgrade corresponds to the basic, together with the SUS can):201,301,303,304,314,316,420,430,630

Steel series: all the basic machining steel can be processed, for example: 20 # steel,45 steel, easy to cut iron (common SUM24L, SUM22, Y12, Y15)

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Turned Parts – Hex Screw

Ming Xiao Manufacturing Co., Ltd engaged in Turned Parts manufacuring more than 20years, we have old lathe turning machine, automatic turning machine, and numerical control turning machine, we can optimize the turning processes to make the machining cost to be lowest, accurate tolerance dimensions we use Numerical control machine, and low toleracne requested dimensions we use old lathe machine to produce, and small turned parts we use automatic lathe machine to produce.

As a professional turned parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turned parts,Copper & Brass turned parts,Aluminum Turned Parts & Machined parts, such as tube coupling, hose coupling, shaft, pipe joint parts, hose connectors & transition connectors, copper machined tube, flange,bushing, knighthead, pedestal, Piston Rod, insert long pin, Dowel Pin, Drive Pin & Rod,ball head bolt, long rod machined parts, long thread tube parts, nonstandard thread bolt & nut,Extension Rod, etc.

We custom Metal turned Parts for all industries, welcome contact us to develop your projects.

The technics & capabilities for Turned parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

The precision telorance can reach to +/- 0.02mm, and the surface roughness can reach N6 standard after milling.

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Stainless Steel Turned Pins

Machined bushings

Stainless Steel Turned Screws

Aluminum Turned Parts