- Page 3 Of 10

Anodized Aluminum Tubes: Precise CNC Turning & Milling for Your Applications

About Ming Xiao Mfg and Anodizing Aluminum Tubes

Ming Xiao Mfg as a China CNC turned Parts Supplier,we specialize in manufacturing precise anodized aluminum tubes with CNC Turning & Milling. Our products are required for any precision machining job with tight precision & surfaces, guaranteeing the best anodized aluminum tube fabrication possible. We have years of experience producing standard and custom-built anodized aluminum tubes.

CNC Turning & Milling: Precise Machining for Satisfaction

Rapid advances in CNC Turning & Milling technology has changed the way we can produce anodized aluminum tubes. Our expertise in working with the latest CNC Turning & Milling machines allows us to create highly precise custom parts to meet the exact standards and specifications of your application.

Ming Xiao Mfg. Quality Anodized Aluminum Tubes

Ming Xiao Mfg provides a wide range of quality anodized aluminum tubes that meet the exacting standards of your application. Our aluminum tubes are machined to the tightest tolerances and surface finishes for the highest quality final product. We can offer aluminum tubes in a variety of shapes, sizes and finishes to suit your specific needs.

Anodizing & Machining Processes

CNC Turning & Milling processes provide us with the ability to fabricate high-precision anodized aluminum tubes with superior accuracy and surface finish. The process involves two stages, anodizing and machining. The anodizing process is performed first which adds a layer of protective finish to the aluminum tube before the machining process begins.

Common CNC Turning & Milling Aluminum Grades

Ming Xiao Mfg. specializes in machining common CNC Turning & Milling aluminum grades including Alloy 2014, Alloy 2024, Alloy 5052, Alloy 6061, Alloy 6063, Alloy 7075 and Alloy 7072. These grades are ideal for any precision machining operation.

Table: Common CNC Turning & Milling Aluminum Grades

Material Grade	Processing Precision	Surface Treatment	Product Types	Applications
Alloy 2014	0.01 mm	Anodizing and Painting	Tubes, Pipes, Rods, Shafts	Building, Marine, Aerospace, etc.
Alloy 2024	0.001 mm	Anodizing, Painting and Polishing	Tubes, Pipes, Rods, Shafts, Plates	Industrial, Automotive, Mechanical parts
Alloy 5052	0.005 mm	Anodizing, Painting and Plating	Tubes, Pipes, Rods, Shafts, Plates, Gears	Industrial, Automotive, Aerospace, etc.

Conclusion: Anodized Aluminum Tubes by Mail Xu Mfg.

Ming Xiao Mfg. is your go-to source for precision CNC Turning & Milling of Anodized Aluminum Tubes. Our expert team specializes in machining all types of aluminum grades and surface treatments for any application. Get quality anodized aluminum tubes and save time and money.

What is anodizing?

Anodizing is an electrolytic process that deposits a chemically stable oxide layer on aluminum surfaces. The resulting oxide film is thicker and stronger than the native oxide coating of aluminum. It is hard, porous, and transparent, making it an integral part of metal surfaces so it will not peel or peel.

In order to overcome the defects of surface hardness and wear resistance of aluminum alloys, expand the scope of application and prolong the service life, surface treatment technology has become an indispensable part of the use of aluminum alloys, and anodizing technology is the most widely used and most successful.

Advantages of anodized aluminum tubes:

1. Strong texture: super strong metal texture: high-grade, beautiful and shining;

2. Low specific gravity: the specific gravity is only one third of that of stainless steel;

3. Scratch resistance: the surface hardness reaches sapphire level;

4. Strong anti-fouling: no fingerprints are left after touching;

5. Anti-static: anti-static does not vacuum and is easy to clean;

6. Good fire resistance: environmentally friendly, non-toxic, completely fireproof;

7. Anti-ultraviolet: good weather resistance, anti-ultraviolet;

8. Non-fading: the color is uniform and non-fading;

9. Strong hardness: special alloy series products

We are specialize in custom Anodized Aluminum tube, we do further CNC turning on anodized products to make texture of decorative design,If you have any aluminum machined Parts need done anodizing,Welcome contact us to discuss about your projects.

Machining Technics

The technics & capabilities for Anodized Aluminum tubes : manual lathe turning,automatic lathe turning, numerical control lathe turning,Precision CNC Turning & CNC Milling, Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

The precision telorance can reach to +/- 0.01mm, and the surface roughness can reach N6 standard after milling.

Materials & Finishes

Available Materials for machined parts: Aluminum Alloys AL5052,AL6061,AL7075…

Finish treating: Natural anodizing, Color Anodizing, Blacking Hard Anodizing.

Lead Time

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Brass Turned Parts

Descriptions

High Quality & Precision Manufacturing Of Brass Turned Parts By Ming Xiao

Ming Xiao Mfg is a China-based supplier of high quality brass turned parts and components. We have been manufacturing high quality turned parts since 1992 and have always maintained a high level of quality and precision in our production process.

Our long history of producing brass turned parts has enabled us to specialize in numerous components including various custom designs that meet the needs of our customers. We have always kept up with today’s ever-advancing technologies and continue use the latest machining technologies and machines for our production.

Brass Grades & Finish Treatment For High Strength & Durability

At Ming Xiao Mfg, we specialize in manufacturing brass turned parts with various grades of brass to meet customer requirements. Whether it is high strength and hardness or excellent corrosion resistance, Ming Xiao has the brass grade you need for your application.

Common usable brass grades includes C83600/Aluminum Bronze, CZ121/CW612N/BS2872 CZ122, C37700/CW614N/BS2874, C38500/CW617N/BS CZ121, CZ122, CDA360/CW617N, C36000/CW602N/BS2872 CZ131, and many other grades are available.

We can offer different finish treatments to machined brass parts to meet the customer requirements, such as sandblasted, electroplate, Anodizing, painting, heat treatment, etc.

Advanced Lathe Turning Machines & Precision

Ming Xiao Mfg possesses an array of turning machining equipments, such as 0640 CNC turning lathe, CNC Turn Mill Combination lathe, Swiss Type CNC lathe, automatic screw machining lathe, etc. Our equipments are capable of precision machining for large and small diameter parts, as well as high quality surface finishes.

We use precision machining capabilities to produce parts with tight tolerance requirements such as +/- 0.005mm, +/- 0.01mm and +/- 0.05mm. With our advanced machines, we always provide the highest precision and quality turned parts.

Wide Variety Of Applications For Brass Inserts & Brass Parts

Brass turned parts are widely used in different applications, such as automobile, agriculture, aerospace, military, electronics, etc. We have been manufacturing brass parts for a wide range of industries, including door handles, knobs and latches; agricultural implements and water irrigation; pumps; motor and electrical equipment; valves; electronic connectors; plumbing and HVAC, and much more.

Know More About Brass Turned Parts With Tolerance Guide

When it comes to machined brass parts, accuracy and precision is essential for quality parts. The tolerance requirements depend on the application. To help customers achieve optimal results with brass turned parts, our experts have created a tolerance guide as following.

Tolerance Guide:

Code	Product Code	Tolerance
H6	IT-15	± 0.006mm
H10	IT-30	± 0.010mm
H8	IT-25	± 0.008mm
H7	IT-20	± 0.007mm
H12	IT-50	± 0.012mm

Rely on Ming Xiao For Your Brass Turned Parts Needs

With our advanced machining equipments and experienced technicians, Ming Xiao Mfg can meet all your brass turned parts needs. We are committed to quality control and providing precision turned parts with the highest level of satisfaction. Contact us today to find out more about the brass turned parts we can offer.

Machining Technics

The technology & capabilities for Turned parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, Drilling, Grinding, Thread rolling, knurling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

The precision tolerance can reach to +/- 0.005 mm, and the surface roughness can reach N6 standard after milling.

Materials & Finishes

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

China Metal Stamping Parts

Descriptions

China Metal Stamping Parts Custom Services

Ming Xiao Mfg is a China Metal Stamping Factory located in Ningbo China,we specialize in sheet metal stamping services more than 20 years,have been customed many kinds of sheet metal stamping & puched parts for different industries.

Providing relavent processes such as punching,bending,cutting,shearing,riveting,spinning,welding,deep drawing,etc.

Have custom many kinds of metal stamping parts,such as sheet metal clamps, metal stamping seals, sheet metal stamping brackets, sheet metal stamping holder, console cover, sheet metal frames, spring clip, stainless steel plates, aluminum & steel shelf, Aluminum cover, Square/ Rectangular washers, metal stamped PCBA front Panel, pressed-in hole parts by PEM studs,nuts & fasteners, screw and pin welded stamping parts,mounted stamping parts, electronic mounting sheet plates, copper terminal connectors, and all metal stamping parts.

As a professional China metal stamping factory, we have more than 50 sets different tonnages conventional punches (stamping machines) from 5 tons – 320 tons, can produce max dimensions with 800mm*600mm sheet metal stamping parts, and the sheet parts thickness from 0.1mm – 8mm of carbon steel or brass, 3mm for stainless steel.

We are also have 6 sets different sizes progressive die stampingmachines, can produce small metal stampings with high speed and low prices. suitable to high volume metal stamping components.

We are professional China metal stamping manufacturers from China Ningbo, if you need custom making any sheet metal stamping parts, welcome send your design and requirements to us, we shall work a more competitive price for you.

Machining Techinics

The technics & capabilities of sheet metal clamps: Punching, cutting, bending / flexing / curving, pressing, forming,welding / bonding, riveting, grinding edge, lettering, components Assembly.

Materials & Finishes

Available Materials for sheet metal clamps: Aluminum,copper/ brass,stainless steel, carbon steel, Mild steel,cold roll steel, Kovar steel,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for samples in 15days.
Lead time for mass production: generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Sheet Metal Clamp

Descriptions

Sheet Metal Clamps Custom Services

We specialize in sheet metal fabricating services more than 20 years,have been customed many kinds of sheet metal stamping & puched parts for different industries.

Providing relavent processes such as punching,bending,cutting,shearing,riveting,spinning,welding,deep drawing,etc.

We have more than 50 sets different tonnages conventional punches (stamping machines) from 5 tons – 320 tons, can produce max dimensions with 800mm*600mm sheet metal stamping parts, and the sheet parts thickness from 0.1mm – 8mm of carbon steel or brass, 3mm for stainless steel.

We are also have 6 sets different sizes progressive die stamping machines, can produce small metal stampings with high speed and low prices. suitable to high volume metal stamping components.

We are professional metal stamping manufacturers from China Ningbo, if you need custom making any sheet metal clamp, welcome send your design and requirements to us, we shall work a more competitive price for you.

Machining Techinics

The technics & capabilities of sheet metal clamps: Punching, cutting, bending / flexing / curving, pressing, forming,welding / bonding, riveting, grinding edge, lettering, components Assembly.

Materials & Finishes

Available Materials for sheet metal clamps: Aluminum,copper/ brass,stainless steel, carbon steel, Mild steel,cold roll steel, Kovar steel,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for samples in 15days.
Lead time for mass production: generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Powder Coated Metal Stamping Parts

Descriptions

Powder Coated Metal Stamping Parts for Top Quality and Durability

Ming Xiao Mfg provides a full range of top quality and durable powder coated metal stamping parts. Our powder coating treatment offers an attractive and durable finish for various industrial, electric appliance and automotive applications. Our professional team carefully inspects the quality of each of our products before they are shipped and meeting customer satisfaction is our number one priority.

What is Powder Coating?

Powder coating is a technology in which particles of a polymeric material are applied to a metal surface as a dry powder which is then melted to form a protective, decorative coating. It is one of the most popular methods of applying a protective finish to metal products.

Features of powder coating:

• Durable, scratch-resistant coating
• Cost-effective for large parts
• Can be applied in many colors
• Environmentally friendly
• Excellent coverage of small areas
• Generally weather-proofed
• No volatile organic compounds (VOCs)

Features of Powder Coated Metal Stamping Parts from Ming Xiao Mfg

Our powder coated metal stamping parts are ideal for applications that require:

High durability
Excellent finish
Corrosion resistance
Various colors and textures
Easy to clean

Technical Specifications

Our powder coated metal stamping parts are fabricated with a high-precision production process. We specialize in lightweight materials such as aluminum, steel and stainless steel. Our cutting samples range from 0.1mm to 12mm and our punching mold can reach up to 24 tons. We have the capacity to roll, fold, drill and cut to your exact specifications. Our experienced technicians are available to assist you in deciding the most appropriate coating for your product.

Advantages of Using Powder Coated Metal Stamping Parts

Our powder coated metal stamping parts can provide advantages such as:

Excellent wear resistance
Excellent chemical and corrosion resistance
Wide range of colors and textures
Affordable cost
Eco-friendly production process
Long service life and durability

Applications of Powder Coated Metal Stamping Parts

Our powder coated metal stamping parts are widely used in many industries, such as aerospace, automotive, construction, and industrial. We have a wide variety of parts and materials suitable for many applications, including automotive handles, engine brackets, window frames, steel gates, kitchenware, fittings, and more.

Quality Assurance and Environmental Considerations

Ming Xiao Mfg is devoted to providing top-notch products that can meet customer satisfaction. We have a strict quality assurance system in place to make sure that each part is of the highest quality. Each part is inspected before shipping.In addition, our production process is Eco-friendly and makes use of environmentally-friendly materials and processes. We are creating reliable and safe products to make sure that our customers are satisfied.

Contact Ming Xiao Mfg for Your Powder Coated Metal Stamping Parts

Ming Xiao Mfg is your one-stop supplier for metal stamping parts. Our experienced staff are here to provide you with the best service and advice on the most appropriate materials and application specific components. Contact us today to learn more about our powder coated metal stamping parts.

Machining Techinics

The technics & capabilities for Metal stamping parts: Punching, cutting, bending / flexing / curving, pressing, forming,welding / bonding, riveting, grinding edge, lettering,Laser Cutting,Wire Cutting,Tapping, components Assembly.

More informations about metal stamping service

Metal Stamping processing is the production technology of product parts with certain shape, size and performance by means of the power of conventional or special stamping equipment, which directly deforms and deforms the sheet in the mold. Sheets, molds and equipment are the three elements of stamping. According to the stamping processing temperature, it is divided into hot stamping and cold stamping. The former is suitable for sheet processing with high deformation resistance and poor plasticity; the latter is carried out at room temperature, which is a common stamping method for thin sheets. It is one of the main methods of metal plastic processing (or pressure processing) and is also part of the material forming engineering technology.

The mold used for stamping is called a stamping die, or a die for short. Dies are special tools for batch processing materials (metal or non-metal) into the required punches. Dies are very important in stamping. There are no dies that meet the requirements. Batch stamping production is difficult to carry out; without advanced dies, advanced stamping processes cannot be realized. The stamping process and the mold, stamping equipment and stamping materials constitute the three elements of stamping processing, and only when they are combined with each other can the stamping parts be obtained.

Materials & Finishes

Metal Stamping Parts Available Materials: Aluminum,copper/ brass,stainless steel, carbon steel, Mild steel,cold roll steel, Kovar steel,etc.

CRS (cold rolling steel) sheet, HRS (hot rolling steel) sheet,hot-galvanize steel sheet (SGCC,SPCC,).
stainless steel: 201,304(L),316(L),321,410,420,430
Aluminum alloy: 1060,2024, 3003,5052,6061,etc
All standard brass and copper: Pure Cu /E-Cu T1,T2,H73,H63,H62,H59,H58…

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for samples of Metal Stamping Parts in 15days.
Generally we use laser cutting or Wire cutting to cut the sheet instead of the punching die,this can save the mold cost once the design need change after samples,after samples approved, open the punching die.becase punching die is much expensive, and bending die is cheap, only make bending die for samples is ok, and it’s fast to make out samples.

Lead time for mass production: generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Anodized Aluminum Plates

Descriptions

Custom Quality Anodized Aluminum Plates From China

Ming Xiao Mfg specialize in sheet metal fabricating services more than 20 years, have been customed many kinds of sheet metal stamping & puched aluminum parts for different industries.

Providing relavent processes such as punching,bending,cutting,shearing,riveting,spinning,welding,deep drawing,etc.

Have custom many kinds of metal stamping parts,such as sheet metal stamping clamps, metal seals, sheet metal brackets, sheet metal holder,console cover,sheet metal frames,spring clip, steel plates,shelf,Square/ Rectangular washers, metal stamped PCBA front Panel, pressed-in hole parts by PEM studs,nuts & fasteners, screw and pin welded stamping parts,mounted stamping parts, electronic mounting sheet plates, copper terminal connectors, and all metal stamping parts.

Die Stamping is the forming process of the workpiece (stamping part) by applying external force to the plate, strip, pipe and profile by press and die to produce plastic deformation or separation. Stamping and forging belong to moulding processing (or pressure machining). The stamping raw materials are mainly hot rolled and cold-rolled steel plates and steel strips.

In addition to cold stamping, we also have high frequency heating machines that can provide hot forging services, and has welding machines, riveting machines, polishing machine,etc. multiple equipments can support us to produce more complex structure hardware products.

Stamping die Specifications:
Mould steel	DC53,SKD11,SKH9,Cr12,45#Steel, WC
Mould style	Single-station dies, Multi-station dies, Progresssive dies,Deep Drawing Dies
Finshing Operations	Forming, Bending,Deburring, Tapping
Mould Accuracy	0.003mm-0.005mm
Advantages:	High precision, fast stamping speed, saving labor and material costs
Tips: All products of the company support non-standard customization, a variety of material specifications are available.

We are also have 6 sets different sizes progressive die stamping machines, can produce small metal stampings with high speed and low prices. suitable to high volume metal stamping components.

We are professional metal stamping parts manufacturers from China Ningbo, we have produced many kinds of anodized aluminum plates or sheets for foreign customers with 15 years experiences, If you are interest in our custom metal stamping services, welcome send your design and requirements to us, we shall work a more competitive price for you.

Machining Techinics

More informations about metal stamping service

Materials & Finishes

Metal Stamping Parts Available Materials: Aluminum,copper/ brass,stainless steel, carbon steel, Mild steel,cold roll steel, Kovar steel,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for mass production: generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Aluminum Brackets Stamping

Descriptions

China Aluminum Bracket Stamping Parts

Ming Xiao Mfg specialize in sheet metal fabricating services more than 20 years, have been customized many kinds of sheet metal stamping & punched aluminum parts for different industries.

Providing relevant processes such as punching,bending,cutting,shearing,riveting,spinning,welding,deep drawing,etc.

Die Stamping is the forming process of the work-piece (stamping part) by applying external force to the plate, strip, pipe and profile by press and die to produce plastic deformation or separation. Stamping and forging belong to molding processing (or pressure machining). The stamping raw materials are mainly hot rolled and cold-rolled steel plates and steel strips.

Stamping die Specifications:
Mould steel	DC53,SKD11,SKH9,Cr12,45#Steel, WC
Mould style	Single-station dies, Multi-station dies, Progresssive dies,Deep Drawing Dies
Finshing Operations	Forming, Bending,Deburring, Tapping
Mould Accuracy	0.003mm-0.005mm
Advantages:	High precision, fast stamping speed, saving labor and material costs
Tips: All products of the company support non-standard customization, a variety of material specifications are available.

We are also have 6 sets different sizes progressive die stamping machines, can produce small metal stampings with high speed and low prices. suitable to high volume metal stamping components.

We are professional metal stamping parts manufacturers from China Ningbo, we have produced many kinds of aluminum brackets stamping parts for foreign customers with 15 years experiences, If you are interest in our custom metal stamping services, welcome send your design and requirements to us, we shall work a more competitive price for you.

Machining Techinics

More informations about metal stamping service

Materials & Finishes

Metal Stamping Parts Available Materials: Aluminum,copper/ brass,stainless steel, carbon steel, Mild steel,cold roll steel, Kovar steel,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for mass production: generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Stainless Steel Pipe Clamp latches

Descriptions

Custom Stainless Steel Pipe Clamp Latches

These Pipe Clamp Latches are made from stainless steel 304,the components consist of 3 sheet metal pieces,2 wireforms and a cold forged pin, It is assembled by buckling and spinning.except the pipe clamp latches,we are also produce pipe clamps from sheet metals.

Ming Xiao Mfg engaged in sheetl metal fabricating services more than 20 years,have been customed many kinds of sheet metal stamping & puched parts for different industries. Providing relavent processes such as punching, bending,cutting,shearing,riveting,spinning,welding,deep drawing,etc.

We are also have 6 sets different sizes progressive die stamping machines, can produce small metal stampings with high speed and low prices. suitable to high volume metal stamping components.

Custom pipe clamp latches for our USA Customer.

Our USA clinet is very satisfied to our pipe clamp latches’ quality, had re-ordered many times in 6 years..

We are professional metal stamping manufacturers from China Ningbo, we have produced many kinds of metal stamping parts for foreign customers with 15 years experiences, If you are interest in our custom metal stamping services, welcome send your design and requirements to us, we shall work a more competitive price for you.

Machining Techinics

The technics & capabilities: Punching, cutting, bending / flexing / curving, pressing, forming,welding / bonding, riveting, grinding edge, lettering, components Assembly.

Materials & Finishes

Available Materials: Aluminum,copper/ brass,stainless steel, carbon steel, Mild steel,cold roll steel, Kovar steel,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for samples in 15days.
Lead time for mass production: generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Turned Parts

Descriptions

Turned Parts from China – MxmParts

Ming Xiao Mfg is a full-service CNC turning Service provider from the manufacturing hub of China – Ningbo. With over 7 years of experience and numerous satisfied customers, we take pride in our expertise in delivering quality and cost-effective turned parts. Our turning department is equipped with advanced CNC technology and experienced operators.

Capable CNC Turning Center.

Our CNC turning centers have a capacity for up to 16” diameter round parts. We are equipped with hydraulic chuck and live tooling that give us tremendous flexibility, allowing us to machine a variety of both simple and complex parts. Our quick change tooling systems feature automatic tool recognition and allow us to perform various types of processes in a single machining cycle.

Precise Quality Assurance System.

At Ming Xiao Mfg, we go the extra mile to ensure that all our turned parts are exactly in accordance with our customers’ specifications. Our quality assurance system is a product of many years of hard work and experience. It offers several features to detect any part inaccuracy and make sure that they have perfect surfaces.

Focused On Optimizing Value.

Ming Xiao Mfg is focused on optimizing the value of the turned parts we manufacture and deliver to our customers. We use our years of experience and knowledge to analyze design-related opportunities, improve process efficiency and reduce manufacturing cycle time. We leverage our advanced manufacturing technology and lean manufacturing system for cost reduction, leading to complete customer satisfaction.

Industry-leading Quality Standards.

At Ming Xiao Mfg, we are committed to delivering top-notch quality standards. We have earned the ISO 9001 and TS/T 16949 certifications for our products and services. We have surpassed all industry requirements and implemented a customer satisfaction management system. Our products have been tested for long-term performance and meet international safety standards.

Turned Parts Specifications

Machines	Machining Tolerance	Materials	Finishes	Types Of The Parts	Served Industries
CNC Lathes	± 0.005″	Carbon Steel, Stainless Steel, Aluminum, Brass, Copper	Anodizing, Passivation, Powder Coating, Sandblasting, Painting, Plating	Screws, Shafts, Pins, Bushings, Nuts, Studs, Washers, Spacers	Aerospace, Automotive, Electricity, Electronics, Mechanical, Petrochemical, Refrigeration

Available Precision Turned Parts

We equiped several high precision CNC lathes imported from Japan, equipped with automatic feeding system, provide Swiss type CNC Lathe turing & milling Services to our clients, which can produce high quality precision turned parts.

We also have high precision CNC machine tools for turning and milling, which can produce precision machine parts with high concentricity and high finish.

Advantages:

(1)Shorten the product manufacturing process chain and improve production efficiency.

(2) Reduce the number of clampings and improve the machining accuracy.

Reliable Delivery of Turned Parts.

We understand deadlines are important, and to make sure our customers get their orders timely, we employ the best warehousing and delivery management system. We work closely with several local and international freight companies to get your goods safely and swiftly to their destination. This is how we make sure that our customers always get their products on time.

Machining Technics

The technics & capabilities for Turned parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

The precision telorance can reach to +/- 0.02mm, and the surface roughness can reach N6 standard after milling.

Materials & Finishes

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Machined Plastic Parts

Ming Xiao Mfg Machined Plastic Parts

The materials used in precision workpieces made in CNC machining plants are divided into two categories: metals and engineering plastics. Metals include aluminum alloy, steel, copper, various hard alloys, etc.; besides metal materials, common materials in CNC machining plants are engineering plastics, which have irreplaceable insulation properties of metal.

Engineering plastics refer to plastics that can be used in mechanical equipment and engineering structures. They have metal-like properties and have high strength, stiffness and toughness.

When it comes to precision machined parts made with a variety of plastics, Ming Xiao Mfg is the preferred supplier for businesses across the world. Our engineers have the necessary expertise to create exceptional machined plastic parts using CNC Milling and Turning processes to create plastic parts with stringent and exacting requirements.

CNC Machining for Quality Plastic Parts

Using CNC Milling and CNC Turning, our engineers are able to produce quality machined plastic parts that meet your highest standards. Our plastic materials include:

Common Used Engineering Plastics

Name	Characters	Types of Fittings	Applications
POM	Excellent wear resistance, low friction, hardness, rigidity, and good dimensional stability	Ball, flange, and threaded fittings	Automotive industry components (shaft housings, gears, door handles, etc.), electrical and computer components, home appliances, and medical devices.
ABS	High Impact Strength, high rigidity, and dimensional stability	Pipe, flange, and threaded fittings	Construction materials, protective helmets, medical devices, electrical enclosures, automotive components, toys, and home appliances.
PA	High mechanical strength, rigidity, and toughness	Flange and threaded fittings	Wear resistant frames for machinery and automotive components, chemical tanks, and medical implants.
PVC	High impact strength, low cost, and high corrosion resistance	Pipe, flange, and threaded fittings	Protective covers, pipe and tubing, conveyor belts, electrical components, and biomedical products.
PC	Low weight, high chemical resistance, and high rigidity	Pipe, flange, and threaded fittings	Electrical components, protective housings, and medical implants.
PTFE	Low-friction coefficient, high temperature resistant, and widely used in robotics	Flange and threaded fittings	Insulators, gaskets, seals, lubricants, and corrosion resistant coatings.
EP	High rigidity, toughness, creep resistance, and good electrical insulation characteristics	Pipe, flange, and threaded fittings	Insulating components in electrical motors, pumps, and housings.
PU	Good flexibility, resilience, and chemical resistance.	Pipe, flange, and threaded fittings	Cushioning and shock absorption in a wide array of industries. Additionally, PU is used in headgear, and biomedical components.

CNC Machining Equipment

As part of our commitment to top quality machined parts, we use only the most modern and advanced CNC machining equipment. Our horizontal, vertical, and high-speed CNC machines provide us with the capability to manufacture components with extremely tight tolerances in various shapes and sizes.

Our CNC Machining Capabilities

Milling Plastic Parts

Ming Xiao Mfg can mill plastic parts from a variety of plastics. Our engineers are able to create complex geometries with tight tolerances and superior surface finishes. We are experienced in producing parts with precise angles, complex curves, as well as the more straightforward parts.

Turning Plastic Parts

We use CNC turning to create precise components of different shapes, such as rods and tubes, for use in various industries. Our CNC turning machines make it possible to get very tight tolerances and the production of production-scale components.

Materials

By utilizing modern CNC machines, we can turn and mill plastics materials such as PEEK, POM, ABS, PA, PVC, PC, PTFE, EP, and PU. We are confident that we can produce components with superior quality in a short turnaround time.

Quality Control Process

We have very stringent quality control processes in our internal production and quality checks. We adhere to stringent quality standards by inspecting materials for any kind of defects or inconsistencies that may occur during manufacturing.

Choose Ming Xiao Mfg for your machined plastic parts?

When it comes to machined plastic parts, Ming Xiao Mfg is your go-to source for quality and reliability. Our engineers specialize in creating top-notch precision parts using the latest CNC Milling and Turning technology.

We use high-grade materials and have stringent quality control processes in place, so you can be sure that you will receive quality plastic parts from us. Contact us today to learn more about our Machined Plastic Parts solutions.

Watch more videos of our machining service, plz visit our Youtube Channel.

CNC Turning Pattern Decorative Parts

Descriptions

What are CNC Turning Pattern Parts?

CNC Turning Pattern Parts are machined parts that have a unique pattern carved onto them using a Computer Numerical Control (CNC) lathe. This type of machining is a complex process, which requires precision cutting and programming of the material to achieve a desired pattern.

CNC machines are often used to create complex patterns, as they can accurately control the motion of the cutting tool in three dimensions. Patterns created using CNC turning can be used for aesthetic purposes or to strengthen parts.

How Are Pattern Parts Made on a CNC Lathe?

When producing CNC turning pattern parts, the process typically begins with the programming of a three-dimensional model of the desired pattern onto the CNC machine. The model is then fed into the machine, where the cutting tool is accurately guided to the locations specified on the model.

The cutting tool moves in two axes while the material rotates around the cutting tool. Depending on the complexity of the part, the programming and cutting process can take several hours to complete. After the pattern has been shaped, a finishing process such as sanding may be necessary to create a smooth surface.

Uses of CNC Turned Parts With Pattern

Turning with 3D pattern parts can be used in many applications across various industries. One of the most common uses for these parts is in the automotive industry, where the pattern can be used to give a decorative look to a surface on vehicles.

In the aerospace industry, CNC turning patterned is often used to increase the strength of parts by creating areas of greater thickness. Patterns can also be created on materials such as aluminum, which can provide a more aesthetic look to the finished product.

Why Choose Ming Xiao Mfg for CNC Turning Pattern Parts?

Ming Xiao Manufacturing is a highly skilled supplier of CNC turned parts with pattern. We offer a comprehensive service that includes programming and cutting, finishing, and assembly.

Moreover, Ming Xiao Manufacturing offers competitive pricing and quick turnaround times, enabling their clients to receive high-quality products in less time.

With their experienced staff and state-of-the-art CNC machines, Ming Xiao Manufacturing is the ideal choice for high-precision pattern turning.

Summary

CNC Turning Pattern Parts are machined components with a pattern carved onto them using a CNC lathe. The process of producing these parts is quite complex and requires precision cutting and programming of the material.

These parts are used in automotive, aerospace, and other industries to add an aesthetic look to a surface, as well as to increase strength.

Ming Xiao Manufacturing is a trustable supplier of CNC turned parts with pattern and can offer a comprehensive service, competitive pricing, and quick turnaround times.

Machining Technics

The technics & capabilities for machined parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, CNC machining,Tooling milling & Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

Follow are the informations about our precision parts by CNC machining.

● CNC Precision machining parts accuracy

Machining accuracy: IT6 level, such as the 10mm dimensions, tolerances can be done0.009mm, 20mm size tolerances can be 0.013mm

● Maximum size of Precision parts suit to CNC machining

Lathe parts (turning parts , such as axes, coupling,bushing, thread rod , etc.) followingthe outer diameter of 300mm, length less than 150mm

Milling parts (box, cylinder, etc.) 800mm long, 330mm wide, 120mm high.

Materials & Finishes

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

● Materials for CNC Precision machining parts

We can produce CNC machining components’ materials are:

An aluminum alloy series: all aluminum and aluminum alloy (ASTM Grade from 1050-7475), commonly used are: 2011,5052,6061,7075, etc.

(2) Copper Alloy Series: all copper and copper alloy, copper, copper, brass, bronze, phosphor (the ASTM grades from C11000 to C38000), commonly used: C11000, C22000, C26000

(3) Stainless Steel Series: all the basic machining stainless steel, the ASTM grades (JISgrade corresponds to the basic, together with the SUS can):201,301,303,304,314,316,420,430,630

Steel series: all the basic machining steel can be processed, for example: 20 # steel,45 steel, easy to cut iron (common SUM24L, SUM22, Y12, Y15)

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

CNC Turning Pattern On Anodized Aluminum Parts

PVD Coating Turned Parts

Descriptions

PVD Coating Turned Parts by Ming Xiao Mfg

Unlocking Excellence in Precision Engineering

Enhance your projects with our exceptional PVD Coating Turned Parts, meticulously crafted by Ming Xiao Manufacturing in China.

What is PVD Coating?

PVD, or Physical Vapor Deposition, is a cutting-edge coating technique that transforms ordinary turned parts into extraordinary components. It involves the deposition of thin, durable coatings to enhance surface properties.

Suitable Materials for PVD Coating

Our PVD Coating Turned Parts are compatible with a wide range of materials, including stainless steel, brass, and aluminum. Ming Xiao Mfg ensures unparalleled quality in every coating application.

Colors That Captivate

Experience a spectrum of possibilities with our PVD coatings, available in a variety of colors. From classic metallic finishes to vibrant hues, customize your turned parts to match your vision.

Functions that Excel

Our PVD Coating Turned Parts not only elevate aesthetics but also provide superior functionality. Enjoy enhanced wear resistance, corrosion protection, and improved performance for your applications.

Applications Across Industries

Versatile and reliable, our PVD-coated turned parts find applications across industries, including automotive, aerospace, electronics, and more. Trust Ming Xiao Mfg to deliver precision and durability.

Why Choose Ming Xiao Mfg?

With a commitment to quality and innovation, Ming Xiao Mfg stands as a trusted partner for PVD Coating Turned Parts. Elevate your projects with our precision-engineered components.

Experience Excellence with Ming Xiao Mfg’s PVD Coating Turned Parts. Contact us today for customized solutions that redefine performance and aesthetics.

Lead Time

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

CNC Lathe Turning Stainless Steel Parts, SS303,SS304,SS316

Titanium Plated Decorative Parts

Descriptions

Custom Titanium Plated Decorative Parts

Ming Xiao Manufacturing Co., Ltd engaged in Lathe Turning Parts manufacturing more than 20 years,We produce various metal parts for all industries, and provide rich finish surface treatment services, such as the PVD Titanium nitride decorative parts.

What is PVD Titanium plating finish?

Titanium plating is a chemical method to attach titanium metal to the surface of other objects. The formed titanium coating has excellent corrosion resistance and can be used to protect the plated object and improve surface wear resistance. There is also a saying that plating titanium or its compounds (such as titanium nitride) on the surface of an object is collectively referred to as titanium plating.

As a professional precision CNC turned parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turning parts,Copper & Brass turning parts,Aluminum Turning Parts & Machined parts.

Need Titanium Plated Decorative Parts Custom Machining Service?

Do you need precision CNC turning service to custom a PVD Titanium plated decorative parts ? welcome contact us to discuss about your projects.

Machining Technics

Follow are the informations about our precision parts by CNC machining.

● CNC Precision machining parts accuracy

Machining accuracy: IT6 level, such as the 10mm dimensions, tolerances can be done0.009mm, 20mm size tolerances can be 0.013mm

● Maximum size of Precision parts suit to CNC machining

Lathe parts (turning parts , such as axes, coupling,bushing, thread rod , etc.) followingthe outer diameter of 300mm, length less than 150mm

Milling parts (box, cylinder, etc.) 800mm long, 330mm wide, 120mm high.

Materials & Finishes

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

● Materials for CNC Precision machining parts

We can produce CNC machining components’ materials are:

An aluminum alloy series: all aluminum and aluminum alloy (ASTM Grade from 1050-7475), commonly used are: 2011,5052,6061,7075, etc.

(2) Copper Alloy Series: all copper and copper alloy, copper, copper, brass, bronze, phosphor (the ASTM grades from C11000 to C38000), commonly used: C11000, C22000, C26000

(3) Stainless Steel Series: all the basic machining stainless steel, the ASTM grades (JISgrade corresponds to the basic, together with the SUS can):201,301,303,304,314,316,420,430,630

Steel series: all the basic machining steel can be processed, for example: 20 # steel,45 steel, easy to cut iron (common SUM24L, SUM22, Y12, Y15)

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for custom samples of metal machined parts is 10days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

CNC Lathe Turning Stainless Steel Parts, SS303,SS304,SS316

Stainless Steel Welded Parts

Descriptions

Customize Stainless Steel Welded Parts

Ming Xiao Manufacturing Co., Ltd engaged in Stainless Steel Parts manufacturing more than 20 years, after years of upgrading, it has now been equipped more than 100set processing machines, some are advanced precision processing equipment.

As a professional stainless steel turning parts supplier from China,we source raw materials from bars,tubes, hot forged blanks,investment castings. Common stainless steel turning parts are made from SS303,SS304,SS316…

What is laser welding?

Laser welding is an efficient and precise welding method that uses a high-energy-density laser beam as a heat source. Laser welding is one of the important aspects of the application of laser material processing technology.

In the 1970s, it was mainly used for welding thin-walled materials and low-speed welding. The welding process is heat conduction, that is, the laser radiation heats the surface of the workpiece, and the surface heat diffuses to the inside through heat conduction.

By controlling the width, energy, peak power and repetition frequency of the laser pulse and other parameters to melt the workpiece and form a specific molten pool. Due to its unique advantages, it has been successfully applied in the precision welding of micro and small parts.

Our Advantages of CNC Turning:

1) Various types of processing equipment, meet different quality requirements of the product, optimize the cost.

2) Rich machining experience, mature supporting services at our local, to meet the different needs of customers.

Available Materials & Technical Parameters:

Stainless Steel:	SS201,SS301,SS303,SS304,SS316,SS430…
Highest Accuracy:	±5μm
Surface Finish:	Ra0.4 / Rz 3.2 / N5

Designs can in many kinds of formats, such as pictures, 3D model, CAD,etc.
Price terms: FOB Ningbo, CIF destination port.
Packing:paper cartons, or Tape and Reel for SMT Pick and Place, then by Composite-board(seaworthy plywood) pallets.

Are you finding a Stainless Steel Parts CNC turning Service?

We custom Stainless Steel Welded Parts for all industries, provide precision CNC machining services,welcome contact us to discuss about your projects.

Machining Technics

The technics & capabilities for Stainless Steel Turning Parts : manual lathe turning,automatic lathe turning, numerical control lathe turning, CNC machining,Tooling milling & Drilling, Grinding, Thread rolling, knurs rolling, cutting, cold heading, hot die forging, welding, Riveting, milling, components Assembly, etc.

Follow are the informations about our precision parts by CNC machining.

● CNC Precision machining parts accuracy

Machining accuracy: IT6 level, such as the 10mm dimensions, tolerances can be done0.009mm, 20mm size tolerances can be 0.013mm

● Maximum size of Precision parts suit to CNC machining

Lathe parts (turning parts , such as axes, coupling,bushing, thread rod , etc.) following the outer diameter of 600mm, length less than 6000mm

Milling parts (box, cylinder, etc.) 800mm long, 330mm wide, 120mm high.

Materials & Finishes

Available Materials for machined parts: Aluminum,copper/ brass,stainless steel,stainless iron,carbon steel, Mild steel,cold roll steel, Plastic Bar,etc.

● Materials for CNC Precision machining parts

We can produce CNC machining components’ materials are:

An aluminum alloy series: all aluminum and aluminum alloy (ASTM Grade from 1050-7475), commonly used are: 2011,5052,6061,7075, etc.

(2) Copper Alloy Series: all copper and copper alloy, copper, copper, brass, bronze, phosphor (the ASTM grades from C11000 to C38000), commonly used: C11000, C22000, C26000

(3) Stainless Steel Series: all the basic machining stainless steel, the ASTM grades (JISgrade corresponds to the basic, together with the SUS can):201,301,303,304,314,316,420,430,630

Steel series: all the basic machining steel can be processed, for example: 20 # steel,45 steel, easy to cut iron (common SUM24L, SUM22, Y12, Y15)

Finish treating: Anodizing,hard anodizing,electroplating of chrome/zinc/nickel plated, tinning,copperize,Colour spray-painting, blackening, hot-dip galvanizing, tephlon plating, etc.

Lead Time

Lead time for custom samples of stainless steel turning parts is 10-20days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Tube Bending Frames

Descriptions

Custom Tube Bending Frames

Ming Xiao Manufacturing Co., Ltd engaged in Metal Tube Bending Frame custom manufacturing services more than 10 years, we have produced various types of stainless steel tube bending fittings from different, include welded tube and seamless pipe, Elliptical tube and rectangular tube.

The Applications & Function Of Tube Frames

Tube frames are used in many automotive and industrial applications and are used to build strong, lightweight and durable structures. They are also used in recreational and athletic equipment such as mountain bikes and surf boards. The tube frames also have a variety of functions which depend on the design and application they are used for. Functions include protection, suspension and stability.

Item	Generally Materials	Finishes	Machining Technology	Uses	Served Industries
Tube Bending Frame	Stainless steel, Carbon steel, Aluminum	Anodizing, plating, powder coating, etc.	CNC Bending,Laser Cutting,Welding, milling, boring, Tube shrinking & Expanding, etc.	Producing bent and formed tubular structures of exhaust components	Automotive industry, Food industry, Production industry, Maritime industry,Furniture industry, etc.

Ming Xiao Custom Tube Bending Frames

We produce metal tube bending frames from materials of stainless steel tube, aluminum tube, carbon steel tube, brass & copper tube.It is usually used for handrails of carts, frames of Windows and chairs, kayak guardrail,handles of toolbox & building structures, industrial heating connecting tubes and other fields.

We have a variety of tube processing equipment, such as automatic tube bending machine, semi-automatic tube bending machine, double-head tube bending machine, curved arc machine, diameter shrink machine,diameter enlarge machine, precision pipe cutting machine, welding machine, drilling Machine, etc.

Shapes Of Metal Tube Bending Frames

We can produce metal tube Bending frames in various shapes, such as straight tube, C-shaped tube, L-shaped tube, U-shaped tube, S-shaped tube, and complex three-dimensional tube components. And do finish of polishing,anodizing, painting, powder coating, electrophoresis and other surface treatment methods.

Are you finding a metal tube frame Supplier?

Ming Xiao Mfg undertake various metal tube Bending frames customize service more than 10 years, We can provide convenient and fast service, prototyping cost is low, reliable quality, won the praise of domestic and foreign customers.

Welcome contact us to discuss your tube bending & fabricating components.

Machining Technics

Shearing; crimping; laser cutting; bending; stamping; pressing; deep drawing; rolling; forming; fabricating; drilling; tapping; riveting; sopt welding; TIG; assembling

Materials & Finishes

Materials for tube bending:

Seamless pipes & Welded pipes:
Carbon steel soft anneled
Stainless steel 201,304,316
Aluminum alloy of AL6061,AL5052,etc
Brass & Copper

Finish for tube bending:

Carbon Steel: Oiled, Heat treating, Carburization, Blackening (black oxide), Zinc plating, Chrome plating, Nickel plating, Powder coating, Painting, etc

Stainless Steel: Satin finish of Polishing & Milling, Brushed, Passivation, Chemical mirror polishing

Aluminum:Polishing, Brushed, Anodizing, Anodine, Powder coating, Painting, Electrophoresis, Vacuum coating, etc.

Lead Time

Lead time for custom new tube bending product is 30days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !

Metal Tube Frames

Descriptions

Custom Welded Metal Tube Frames

Ming Xiao Manufacturing Co., Ltd engaged in Metal Tube Frame custom manufacturing services more than 10 years, we have produced various types of stainless steel tube bending fittings from different, include welded tube and seamless pipe, Elliptical tube and rectangular tube.

We produce metal tube frames from materials of stainless steel tube, aluminum tube, carbon steel tube, brass & copper tube.It is usually used for handrails of carts, frames of Windows and chairs, kayak guardrail,handles of toolbox & building structures, industrial heating connecting tubes and other fields.

Shapes Of Metal Tube Frames

We can produce metal tube frames in various shapes, such as straight tube, C-shaped tube, L-shaped tube, U-shaped tube, S-shaped tube, and complex three-dimensional tube components. And do finish of polishing,anodizing, painting, powder coating, electrophoresis and other surface treatment methods.

Are you finding a metal tube frame Supplier?

Ming Xiao Mfg undertake various metal tube frames customize service more than 10 years, We can provide convenient and fast service, prototyping is low, reliable quality, won the praise of domestic and foreign customers.

Welcome contact us to discuss your tube bending & fabricating components.

Machining Technics

Shearing; crimping; laser cutting; bending; stamping; pressing; deep drawing; rolling; forming; fabricating; drilling; tapping; riveting; sopt welding; TIG; assembling

Materials & Finishes

Materials for tube bending:

Seamless pipes & Welded pipes:
Carbon steel soft anneled
Stainless steel 201,304,316
Aluminum alloy of AL6061,AL5052,etc
Brass & Copper

Finish for tube bending:

Carbon Steel: Oiled, Heat treating, Carburization, Blackening (black oxide), Zinc plating, Chrome plating, Nickel plating, Powder coating, Painting, etc

Stainless Steel: Satin finish of Polishing & Milling, Brushed, Passivation, Chemical mirror polishing

Aluminum:Polishing, Brushed, Anodizing, Anodine, Powder coating, Painting, Electrophoresis, Vacuum coating, etc.

Lead Time

Lead time for custom new tube bending product is 30days.

Lead time for mass production:generally a order is 30-60days, if machining process is too complicated or quantity is very high,the lead time will longer.

Certificates

We can provide COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports also available !